RAL8015 Chestnut Brown 1 Litre 2K Direct Gloss 510 PU Topcoat DTM 5:1

Variety Paints ‘N’ More StocksValspar Automotive Paint.

RAL8005 Chestnut Brown1 Litre 2K Direct Gloss 510 PU Topcoat DTM

Product Description: IME.TB510 PU Topcoat DTM High Gloss with 80% Binder – 20% Color Toner optional 70% Binder – 30% Color Toner (on low opacity colours), is a two component, Polyurethane Topcoat DTM (direct to metal) with a high gloss finish. This Binder contains anticorrosion chemicals offering excellent corrosion protection. IME.TB510 is specially developed for Industrial OEM and aftermarket repair industry.

5: 1 with AU500 PU ACTIVATOR PLUS 10-30% RS605 Reducer OR RS607

Application enables fast operation – reducing costs. Air-dry and force dry capabilities. All Color Toners are chromate and lead free. IME.TB510 provides excellent UV protection. Substrates: Iron, steel, stainless steel (blasted), cast iron, galvanized steel, aluminum. Primers: IME.FP400/401Epoxy Primer, IME.FP500/IME.PB500 PU Primer DTM Other: Solvent resistant surfaces, cleaned/sanded/hardened original and cured coatings.

Preparation: Dry Sanding VIM Primers: P180 P240 P320. Dry sanding: P80 P180 Galvanized: Sweep blasting recommended. (More Detailed information go-to Preparation and Pre-treatment on CRS or website www.valsparindustrialmix.com) Surface Preparation: Abrasive blast to EN ISO 12944, Part 4 (ISO Sa 2.5) with a uniform blast profile of 20 to 50m.

Material Description Application Method Minimum DFT m Maximum DFT m Minimum WFT m Maximum WFT m IME.TB510 Spray 50m 80m 65m 110m *Product can be brushed and rolled. Cleaning: Surface must be dry and free from any contamination, e.g. oil, grease, release agents. Use IME.AD690 Solvent Degreaser or Valspar Wax and Grease Remover. (More Detailed information go-to cleaning processes on CRS or website www.valsparindustrialmix.com)

Recoating: Can be recoated with IME.CC700 Clear Coat Anti Graffiti (see TDS) Physical properties: Chemical base Polyurethane Density (kg/l) 1,023 (Binder) Volume solids (%) Weight Solids (%) 52.9% 63.0% Flash point 29C Pot life (+20C) approx. 1 2 hours Shelf life min. 24 month under normal storage conditions and unopened tins Coverage (m) approx. 8.5m 40m (DFT) Gloss High Gloss >90 GU/20 Color Binder Transparent Temperature Stability Dry Heat up to 140C VOC (g/l) Max. 490g/l see the CRS (VOC: 2004/42/IIB(d)(420g/l)) Processing temperature +10C till max. +40C, max. Humidity 85% Technical Data Sheet EMEAI Valspar bv Zuiveringweg 89 8243 PE Lelystad The Netherlands Tel. +31 (0) 320292200 www.valsparindustrialmix.com

IME.TB510 PU Topcoat Binder DTM High Gloss IME.TB510 / AU Date of issue: 07/2014 – Version: 1.3 These products are for Professional use only

Page 2 Application Data Cleaning: IME.AD690 Solvent Degreaser Valspar Wax and Grease Remover Surface must be dry and free from any contamination, e.g. oil, grease Preparation: Dry sanding VIM primers: P180 P240 P320 Sanded systems: P80 P180 Galvanized: Sweep blasting recommended Abrasive blast: AS 1627.4 Class 2.5 (ISO Sa 2.5) with a uniform blast profile of 20 to 50m Handling:

Color preparation: 1. Stir binder until homogeneous 2. Add Color Toners 3. Mix mechanically (paint shaker/ mechanical stirrer) Before use/spraying: 1. Mix mechanically (paint shaker/ mechanical stirrer) 2. Add Activator and Reducer 3. Stir this mixture well with a mixing stick or a (mechanical) stirrer Mixing ratio with Color Toner: (By volume) IME.TB510 PU Topcoat Binder DTM High Gloss IMU.CT Range of VIM Color Toners (For mixing formulas see VIM CRS) 80 parts 20 parts or 70 parts 30 parts Mix stick: Use the mixing stick M3 5:1 (M3 – 74-203 = 5:1/6:1) or M6 (74-206 standard) / M7 (74-207 large) Universal cm-stick Mixing ratio with Activator and Reducer: (By volume) IME.TB510 PU Topcoat DTM High Gloss IME.AU500 PU Activator IME.RS603 Universal Reducer Fast or IME.RS605 Universal Reducer Medium or IME.RS607 Universal Reducer Slow or IME.RS609 Universal Reducer Ultra Slow 5 parts 1 part + 10-20% Faster process of drying: IME.AA600 Accelerator + 3 5% Viscosity: 22 26 sec. (DIN4/20C) Gravity or Suction Feed: Nozzle set Spray gun High pressure Spray gun Reduce pressure HVLP (Air cap pressure) Airless/Airmix Pressure Pot 1.4 1.8mm 3,0 4,5 bar (42 65 psi) 1,5 2,5 bar (21 36 psi) 0,7 bar (10 psi) maximum See info manufacturer 1.0 1.5mm

Application: Film Thickness: (recommended 50 80m) Option 1: coat followed by 1 full coat 40 60m (DFT) Option 2: 1 full closed coat followed by 1 full closed coat 60 80m (DFT) Technical Data Sheet EMEAI Valspar bv Zuiveringweg 89 8243 PE Lelystad The Netherlands Tel. +31 (0) 320292200 www.valsparindustrialmix.com IME.TB510 PU Topcoat Binder DTM High Gloss IME.TB510 / AU Date of issue: 07/2014 – Version: 1.3 These products are for Professional use only Page 3 Between coats at 20C: Before baking at 20C: 5 minutes 10 minutes 5 10 minutes 10 minutes

Clean up: (check the local regulations!) IME.RS60x Reducer Solvent or Valspar Gun washer Airdry at 20C: Dust Free: 25 30 minutes Dry to assembly: 3 5 hours Dry: 8 10 hours Forcedry at 60C 70C: 30 minutes 60C object temperature IRdry: 12 15 minutes (The panel must not reach a temperature above 90C) Use suitable respiratory protection (we recommend the use of a fresh air supply respirator). Recoatable: Recoatable 1hr 12hrs at 20 C IME.CC700 Clear Coat Anti Graffiti (See Technical Data Sheet) After 12 hours: Sanding required Polish: Dust and minor imperfections can be polished out after the stated air-dry times have been reached, or after a full bake at 60C object temperature, followed by a cool down of the object to ambient temperature. Before polishing, make sure the surface is well cured. Follow the instructions of the polish manufacture.

Precautions: During application all health and safety measures referring to the use and handling of coating materials are to be observed, e. g. existing regulations issued by the trade associations in the Chemical Industry. For Health and Safety information please refer the Material Safety Datasheet (MSDS). Information also available on our webpage: www.valsparindustrialmix.com Note:

The products listed are intended only for the professional user and for professional use. All recommendations in words and writing given on the use of our products to customers or users are not binding and do not give reasons for secondary obligations resulting from the bill of sale. Every care is taken to ensure that the technical information provided is accurate and up to date according to the present state of knowledge in science and our experience.

These recommendations do not, however, exempt the customer from autonomously checking whether our products are suitable for the intend purpose. The durability of the coating system largely depends on the thorough preparation of the surface. Furthermore our uniform terms of delivery and payment are applicable. With the publication of this Technical Data Sheet all previous versions regarding this product are no longer valid.